i would like some help looking for some new gears,does anybody produce 3;20s or 3;30s for a bop 10 bolt?

They are available in; 3.08 , 3.36 , 3.55 , 3.73 , 4.11

No!! The only new gears you can get are 3:55 and up. 3:08 and 3:20 are only available used

They are available. Check this auction. They have them. Just contact them and they would most likely break up the kits. If they have them then they are being produced. Nice kit by the way.
LINK: http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&ih=017&sspagename=STRK%3AMEWA%3AIT&viewitem=&item=270147997432&rd=1

Jim. The add states non BOP gears. He couldn't use them on his carrier. (New Non BOP Gear Set, Conversion Kit which includes Yoke and Collar for Non BOP Gear Set, )

You are correct. You have have to get the new carrier too. Which might be a good idea for most that still have the original carriers.

So we can run a corporate 8.2 in the BOP axle by converting the carrier & yoke? Then couldn't you just go to the junk yard and pull this from almost anything??

You can but the corporate 8.2 is weaker than the BOP. I would stick with used gears with BOP or the aftermarket differential.