now that i have two front shakers. what it the best way to install them on an assembled car? any pics would be welcome.

How assembled? If fully assembled, it will not be fun.

https://firstgenfirebird.org/forums/ubbthreads.php/topics/146094/Re_Cocktail_Shakers.html#Post146094

yes fully assemble. it's one of the few parts missing. i guess while i have the fenders off,i'll install all the splash sheilds. what are the correct names for the rubber peices stapled to the wheel wells and core support

I havent done that , but I would think you could get to the area by loosen up the inner fenders??

The problem will be the very awkward angle you will be at to install them without the nose off.

If the fenders are off, no problem.

They can be removed/replaced with the fenders on and the battery and washer bottle stuff removed. Just be very careful maneuvering them into place to keep from denting the fender from the inside.

Here are a few pictures of how they are installed. It's fairly easy to access by removing the bumper assembly. If you dont have the seperate brackets they are easly made from bar stock (we made ours)