Building a T/A replica 69' and would like to know what are the correct tires for this application. I will be mounting them on rally ll rims 14/7.

Thanks

Christian

f70-14 whitewall's

The Goodyear Polyglas F70-14 (small white letter) were also available, and were optional on the 69 Trans Am. These tires are available repro, but are very expensive.

thank you

I don't like the white walls, it's not right on a muscle car.

thin white line tires, try michiline symetry. 1/2 inch thick! look awesome and original

I don't mind the whitewalls, as long as they were available on the actual car. For instance, they're not too bad looking on a 69 Trans Am because most of the factory photos of 69 T/A's show them with whitewalls. But the whitewall stripe has to be right width (I believe it was a 3/8" stripe) in order to look good. Anything wider and it looks tacky.

The 1968 Hurst/Olds is another car that looks ok with whitewalls (that was only tire available on the 68 H/O). I've seen white letter tires on a 68 H/O, and it just doesn't look right.

One of the worst applications of whitewalls I've ever seen are on a 73 Trans Am, which was actually available (I believe they were radials), and they really look wrong on those cars.

Try his- I have a set I bought and paid 100 bucks per for my 67.

http://www.tirerack.com/tires/tires.jsp?...%20Stripe%200.5

I also have an old fashioned belted whitewall (white stripe) and it measures 1/2 inch just like these new symmetry tires from Micheline. Or you can buy the belted repop tires for about 160 a tire but if you are driving the car, you may want radials