|
|
|
|
Joined: Nov 2010
Posts: 4
Member
|
|
Member
Joined: Nov 2010
Posts: 4 |
Does anyone have a template for a 69 firebird 4 speed hole? New pan, forgot to save old one!
Thanks
|
|
|
|
|
Joined: Nov 2010
Posts: 4
Member
|
|
Member
Joined: Nov 2010
Posts: 4 |
Also need hole layout for console holes if possible, thanks again
|
|
|
|
|
Joined: Feb 2010
Posts: 424
Member
|
|
Member
Joined: Feb 2010
Posts: 424 |
Kinda off topic, but did the factory use a torch to cut out the hole like they did on the Camaros?
My 69 Camaro is torn apart at the moment. I can get some measurements when I get home this evening.
Larry
Larry
Current Project: 69 Camaro Z/28 Resto Mod
|
|
|
|
|
Joined: Nov 2010
Posts: 4
Member
|
|
Member
Joined: Nov 2010
Posts: 4 |
Camaro will be different as the console is different. Still need measurements if anyone can do it.
|
|
|
|
|
Joined: Mar 2004
Posts: 11,905
Valued Mentor
|
|
Valued Mentor
Joined: Mar 2004
Posts: 11,905 |
Kinda off topic, but did the factory use a torch to cut out the hole like they did on the Camaros? Our very early built '68 has an ugly torched out hole. It is a PHS documented unaltered '68, so I was surprised to see that.
|
|
|
|
|
Joined: Sep 2000
Posts: 1,375
Member
|
|
Member
Joined: Sep 2000
Posts: 1,375 |
The air vents in the front fenders of 69 Trans Ams were torched out too. An original owner showed me back in the early 80's.
John 
|
|
|
|
|
Joined: Dec 2005
Posts: 5,108
Power Member
|
|
Power Member
Joined: Dec 2005
Posts: 5,108 |
My 67 has a nice clean factory one.
No sharp edges.
Strange the factory would "hack" later years...
Last edited by Region Warrior; 11/15/10 05:54 PM.
|
|
|
|
|
Joined: Nov 2010
Posts: 4
Member
|
|
Member
Joined: Nov 2010
Posts: 4 |
Still looking for measurements for 60 4 speed with console hole?
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,862
| |
Most Online19,810
Feb 1st, 2026
|
|
|
0 members (),
1,616
guests, and
65
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
