Hey I need some help! I need to know if anyone has any pictures that show the brake line routing from the master cylinder to the 4 piston disc brake calipers for a '68 Bird. Any help would be appreciated. Thanks!

Anyone? Even if it's just a picture of the line running into the caliper hose mounted to the frame will help me more than anything else.

I'm looking for a factory correct set up. Not a single piston disc. brake conversion set up but a real 4 piston factory set up.

Thanks, Frank

I may be able to help when I get home tonight. I'll see what I can do.

Ed

Let me know how it goes. I have been toying with the idea of converting my drum setup to a factory disc (4 piston).

Battery was dead in the camera last night so I will try to get them this weekend for you if you still need them.

Ed

Yes still need some pictures. You can email them to me directly at:

fnp3374@sbcglobal.net

Any pictures would help. Brake line routing, how it goes into the hose on the frame mount etc...

I purchased a complete 4 piston kit from inline tube and purchased the s.s. brake like kit as well but the lines I got don't seem to be bent right. I called them a couple of times sent them some pictures etc...of the work on the car and they say I have the right lines but we don't think so. They say the brake hose off the caliper is suppose to go into the frame bracket from the top and point downward. I've never seen a GM car like that. The line the way it's layed out threads in from the bottomside. Just doesn't make sense.

Everything else with the installation went like a million bucks but the brake lines.

Thanks, Frank

Need help on a 1967 firebird fender tag it has W-2L* on the last line can anyone tell me what this stands for

Email sent.

Thanks for the pictures! That helped like you couldn't believe! Most appreciated!

Later, Frank