I don't have my first gen anymore and need to unload these seats.
The front buckets are original frames, stripped down, cleaned up and covered with two coats of Rustoleum.
For the front seats I have new springs, foam, covers (black standard), latches, backs (black)...basically all hardware is brand new from Classic industries, except for the rails. The rails are a bit rough, usable but need to be restored. Other than the rails, these seats are ready to be put together and installed right into your car.
For the rear, I have stripped down the back fold down panel, it is ready for a repaint and new included carpet (black). I've also stripped and cleaned up the bottom frame, and have the original springs to use as a guide for a new set.
The actual fold down portion of the rear needs to have it's springs replaced as well. For the rear seat I also have a black cover set (purchased with the fronts to guarantee 100% match). I also have all the latch hardware for both '67 and '68 (since they were different) and brand new metal pieces that can convert a non-fold down car to a fold down car.
I also have the rear side armrests, and all new covers in black for them too.
I'm in Phoenix, AZ and would prefer not to ship.
Best offer, feel free to call with any questions: 602.516.4319.
