howdy just about complete on the rotissiere on my very first car build 69 bird conv--need to do complete floor rear to fire wall , should i buy this in one piece , or better to do 2 piece---what is your guess in hours to do this , also must do rear frame rails, also whats the opion on where to buy npd or fire bird central , these will be shipped to arizona and i will pick them up and bring them to puerto vallarta,.....crasy hey ...... adios and thanks in advance for all opions ron

Depending how rough the car is 100 hours + -

Get the one piece. Got a zillion pics I can send you. Also, you need a frame cart.

thanks guys --man what a form , education about to start ron

howdy --would like to see all photos, but one i would like now is the car sitting on the frame adios ron

Here is a 69 floor, had the old one out in most of a day and new in the next, and didn't overwork myself at that. Still need to add seat mounts

Yes,definitely use the one piece so much easier. I got my floor pan, trunk pan and frame rails from Classic Industries.

Here's a link to mine https://firstgenfirebird.org/forums/ubbthreads.php?ubb=showflat&Number=261515&page=1

howdy guys , first of all thanks gus68 for the frame cart plan, and jerry for the photos , so i under stand removing the floor pan is done all on the cart, is this correct , thanks again ron----and i see the rear rotiserie on jerrys photo was bolted to the rear bumper, and yea the complete floor and frame rails , are a no brainer if needed adios ron

Mine is actually a body stand through the body mount holes in the front and the holes in the front of the frame rails