I would like to get rid of some of my clutter that I have left after my restoration.

All of the items a useable or driver quality.
A prices include local pickup and shipping will need to be added.

68 NOS outside door fuzzies 2 piece door set. - 200.00

OE 68 AM Radio Nice and working - 150.00

OE Under Dash Heater Core Case Box- 100.00

Sold- 68 OE Dash Harness. Harness looks to be in good shape and wires not hard. All plugins are
there and marked. Only splice is the high low switch. No other skinned wires - 100.00 - sold

Sold- 68 OE Convertible Wire Harness with the Power Accessory Lead Wire and the Power Accessory
feed wire. Very good shape - 25.00- sold

68 OE convertible rain gutter - some screw holes cracked, - 25.00

68 OE transmission Cross member for (automatic turbo 350 , power glide , three or four speed
manual transmission) - 50.00

67-69 New Reproduction Transmission Cross member for (automatic turbo 350 , power glide ,
three or four speed manual transmission) - I had it powder coated and looks very nice. 80.00

OE Gas tank looks good inside. 20.00

OE 400 grills - newly painted and I have epoxied the usual break above outer headlight.
Driver quality No Trim . - 75.00 set

OE Side vent shut off elbows , deflectors and bezels- (46 years of dirt and nasty) - 25.00 set

OE Radiator Support Gusset Panels - need the lip repaired with nuts. - 25.00 set

OE Rear standard black seat belts. dirty. - 100.00 ( 3 male and 3 female)

OE Convertible B pillar brace- 25.00

OE Battery tray- 25.00

White windshield washer tank and OE bracket - 15.00

Rockers moldings - reproductions - driver quality - 25.00

Wheel moldings - reproduction driver quality- 15.00

Sold - New repro Lower baffle - fiberglass - 80.00 - sold

New Repro right trunk floor to 1/4 panel extension - 30.00

convertible Front windshield - 25.00

2 complete sets of control arms. 1 set is both left and right sides - 50.00 set

emblems - fender script, grill script, door panel birds, 400 hood.

-----Not 68 related----------

4 - Rally II rims 14x6 - blasted and painted - 200
(1) M5 3 24 KX
(3) M5 8 45 KM

New 650 CFM Four Barrel Model 4165 Spread Bore, Divorced Choke, Mechanical Secondary

Carburetor - 350

Two - 11 bolt timing covers good condition - 50 each.
69 sub frame maybe from a Camaro - dirty with surface rust. Body mounts holes look to have

been replaced, weld not pretty - 100.00

Here are some additional parts.
Convertible tack strip end pieces only good shape - 50.00

Convertible top rubber seals. No header seal just the middle and back pieces. Good shape. - 50.00

Two Square 69 style mirrors - 30.00

Trunk templates - Pontiac letters and 400 - 10 each

GM Hood springs - 20.00

New Engine mounts. Pair- 25.00

Old original engine mounts - 10.00

Sold- Pitman arm power steering - 15.00 - sold

Sold - Hurst plus shifter 4340 , flat shifter arm and knob , linkage and mounting bracket - 100.00 - sold

Power steering pump to block bracket ( needs heli coil on top bolt hole) - 15.00

Engine harness - lot of splices and hard wire. Good for plug in connectors only - 20.00

Rear harness - no splices usable for connectors or to use - 20.00

Valley pan- clean and painted has some pitting on top - needs a little metal work around the edges- 40.00

Saginaw manual steering gear and pitman arm - 50.00


Link to some photos of some of the items for sale. http://www.flickr.com/photos/silver-bullet/sets/72157638653297833/

I'll take the redlines for $40.

LOL. I don't have them on my list just wheels only.,

oh darn! I always tell my kids, "it never hurts to ask".

I am looking for the upper control shafts, I would be interested in one of your somplete setes if these are included?

Yes or I can sell you the control shafts. I have a set seating to the side. PM me if interested in either.
Thanks

HI. CAN YOU PM ME A PICTURE OF THE 67-69 CROSS MEMEBER THANKS

the original or the repop?

Hey Harold im interested in the following after looking at the pics:

Wheel moldings - reproduction driver quality- 15.00 (send me a pic of these in pm please)
White windshield washer tank and OE bracket - 15.00
Rockers moldings - reproductions - driver quality - 25.00
Two Square 69 style mirrors - 30.00

do you still have the radio plate also?

can you PM me on these?

Updated list.

OE 68 AM Radio Nice and working - 150.00

OE Under Dash Heater Core Case Box- 100.00

68 OE convertible rain gutter - some screw holes cracked, - 25.00

68 OE transmission Cross member for (automatic turbo 350 , power glide , three or four speed
manual transmission) - 50.00

67-69 New Reproduction Transmission Cross member for (automatic turbo 350 , power glide ,
three or four speed manual transmission) - I had it powder coated and looks very nice. 80.00

OE Gas tank looks good inside. 20.00

OE 400 grills - newly painted and I have epoxied the usual break above outer headlight.
Driver quality No hockey stick Trim put does include a new repop "Pontiac" script emblem . - 75.00 set

OE Side vent shut off elbows , deflectors and bezels- (46 years of dirt and nasty) - 25.00 set

OE Radiator Support Gusset Panels - need the lip repaired with nuts. - 25.00 set

OE Rear standard black seat belts. dirty and pitted. - 80.00 ( 3 male and 3 female)

OE Convertible B pillar brace- 25.00

OE Battery tray- 25.00

Rockers moldings - reproductions - driver quality - 25.00

New Repro right trunk floor to 1/4 panel extension - 30.00

convertible Front windshield - 25.00

1 complete sets of control arms- 30.00

New 650 CFM Four Barrel Model 4165 Spread Bore, Divorced Choke, Mechanical Secondary
Carburetor with custom bent fuel line - 350

Two - 11 bolt timing covers good condition - 50 each.

69 sub frame maybe from a Camaro - dirty with surface rust. Body mounts holes look to have
been replaced, weld not pretty - 100.00

Convertible tack strip end pieces only good shape - 50.00

Convertible top rubber seals. No header seal just the middle and back pieces. Good shape. - 50.00

Trunk templates - Pontiac letters and 400 - 10 each

GM Hood springs - 20.00

New Engine mounts. Pair- 25.00

Old original engine mounts - 10.00

Power steering pump to block bracket ( needs heli coil on top bolt hole) - 15.00

Engine harness - lot of splices and hard wire. Good for plug in connectors only - 20.00

Rear harness - no splices usable for connectors or to use - 20.00

Valley pan- clean and painted has some pitting on top - needs a little metal work around the edges- 40.00


Link to some photos of some of the items for sale. http://www.flickr.com/photos/silver-bullet/sets/72157638653297833/

got the parts wednesday, Thanx Harold,great doing business with you.