Trying to make sense of this shield. I have a shield installed on my 400 and has a slight bend (maybe 30 deg.) and the solenoid wires run thru it. The pictures I've seen of the shield is "straight" and it says that the battery cable goes thru it. Do we have 2 shield on the car?

Just one from the best I can remember...one with bend.

Same here, just this one on mine:

The battery cable is run per: http://www.thefirstgensite.com/library/partscounter/illustrated/elect/elect2.html
A wire loom is used to insulate the cable where it runs near the engine but no steel tube.

Cool, that's the one I have. Good to know I am not missing one. thanks guys!