|
|
|
|
Joined: Dec 2011
Posts: 62
Member
|
|
Member
Joined: Dec 2011
Posts: 62 |
Hi
I have tried searching for this but not come up with anything. I have fitted new front fenders with no holes for the emblems. Could anyone give me a few measurements of where to position them to drill the holes. I know you can buy a template but by the time it is sent to the UK it is costing quite a bit. I can look at pictures but a few measurements would help.
Thanks
|
|
|
|
|
Joined: Oct 2005
Posts: 611 Likes: 3
Member
|
|
Member
Joined: Oct 2005
Posts: 611 Likes: 3 |
I had to transfer to new fenders too. Fortunately I have the original fenders and emblems to reference.
Thanks,
Dennis
|
|
|
|
|
Joined: Dec 2011
Posts: 62
Member
|
|
Member
Joined: Dec 2011
Posts: 62 |
Hi Dennis
That's so much more than I hoped for.
Many thanks
Mark.
|
|
|
|
|
Joined: Oct 2005
Posts: 611 Likes: 3
Member
|
|
Member
Joined: Oct 2005
Posts: 611 Likes: 3 |
You're welcome. I still have the fender and emblems if you have questions once you get into it.
Thanks,
Dennis
|
|
|
|
|
Joined: Oct 2019
Posts: 2
New Member
|
|
New Member
Joined: Oct 2019
Posts: 2 |
Does somebody make an actual template?
|
|
|
|
|
Joined: Oct 2005
Posts: 611 Likes: 3
Member
|
|
Member
Joined: Oct 2005
Posts: 611 Likes: 3 |
Everybody sells them. Search "Firebird fender emblem template" and buy from your favorite parts house.
Thanks,
Dennis
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,862
| |
Most Online19,810
Feb 1st, 2026
|
|
|
0 members (),
2,192
guests, and
74
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
