I need some help figuring out the wiring of a wiper motor on a 1969 firebird. All the wires are gone and I am starting from scratch with a motor mounted in the firewall. I have a brand new correct switch for the dash. Pictures or a diagram of how the wires should be attached coming off the motor and switch would be very helpful.
Thanks

http://thefirstgensite.com/html/69wirindex.html
Here ya go.

Here is the low speed circuit

And here is the test diagram

I need help with this two like a dummmy i pulled the wires off the back of my wiper switch and have no idea how they go back on. there is three like show above(DB LB and Black) and they are in a L shape with two of them over top of each other and one offset to the drivers fender side of the switch. Can someone help with this