|
|
|
|
Joined: Dec 2011
Posts: 62
Member
|
|
Member
Joined: Dec 2011
Posts: 62 |
I have just fitted a New electric choke to my Rochester q jet as the hot air choke would not work with the intake I have.
I am a bit confused as when the 12v is applied ( I got this from the wiper motor feed ) The metal coil in the choke housing contracts as it gets hot in affect pulling the choke on. I understand that it is supposed to expand pulling the choke off as it gets warm. Have done something wrong?
Thanks
|
|
|
|
|
Joined: Jan 2010
Posts: 2,405 Likes: 1
Member
|
|
Member
Joined: Jan 2010
Posts: 2,405 Likes: 1 |
Maybe the spring in the cap is in backwards?
Are you sure your getting zero volts at the choke with the key off? If you are getting 12 volts with the key off and zero volts with the key on the choke would be hot all the time except when the key is on at which time it would cool and open choke. Where is the choke grounded?
Al
|
|
|
|
|
Joined: Dec 2011
Posts: 62
Member
|
|
Member
Joined: Dec 2011
Posts: 62 |
Hi Al
Yes 12v when key on only, I thought about turning the spring round but what I have found online says they should expand when hot. I wonder if the spring is wound the wrong way. They are not that expensive so may just order another one from a different source and see what happens
Thanks
Mark
|
|
|
|
|
Joined: Jan 2009
Posts: 3,049 Likes: 10
Senior Member
|
|
Senior Member
Joined: Jan 2009
Posts: 3,049 Likes: 10 |
I believe the electric chokes are adjustable by loosening up the housing and turning it.
-Jeff
|
|
|
|
Forums57
Topics35,534
Posts298,850
Members8,862
| |
Most Online19,810
Feb 1st, 2026
|
|
|
0 members (),
410
guests, and
58
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|
|
|
