I am replacing the body bushings and the firewall mount point is rusted out to about 2 inches does any one have a template for a repair patch that I can duplicate

Thanks Bryan

If you have a picture of it Bryan, I might can help you out. You can post it or email it to me CDJr@bellsouth.net

I think you can buy pieces to weld in to address rusted out holes in the subframe. I know I've seen them in some of the catalogs--Ames, I think. As for what the original dimensions of the bushing holes are, I'm afraid I don't know. Maybe someone who does will post here before too long.

Maybe this will help. Keep in mind Im NOT an artist.

CDJr

Thank you, this is what I was looking for

Bryan

Glad it helped, Bryan.
I forgot to mention those measurements are from the top side, and so theyre from the OUTSIDE of the steel flanges that bend down and include the thickness of them, cuz theyre like 1/8" thick. Hope that makes sense.

Bryan. This is a link to John's 67 Daytona Blue Metallic Conv.I guesses he have done the job you are about to do.
http://home.woh.rr.com/firebird67/subframe.htm

Bjørn K