I think my 69 firebird has a 67 camaro rearend. Comparing bearing seals, wheel bearings, brake drums,ect. in online part stores the numbers are different. Can someone tell where to look for the numbers on the housing to tell me what this rearend is out of. Thanks

Easy way to identify Pontiac rear end is that they don't use C-clips in the end of drive axles. On Chevrolet rear ends axles are secured with C-clips.

67 Pontiac rear ends have ID numbers on back side of tube on passenger side. 68-69 have numbers on back side on drivers side.

Physically rear ends from Nova, Camaro and Firebird fit, but Chevy 8.2 is weaker than Pontiac 8.2.

Jari

Thanks......

I have a 1969 Firebird with a 10 bolt non-posi rear end. I have been looking to change the gears (currently 2:73 I think) to 355 or 373 with a posi. Could you tell me where I might find the information to change them myself (mechanically inclined, but still have never attempted this type of work). Also I have been told that Richmond Gears and an Eaton posi is the only way to go. Cost is about 1250 Canadian, what do you think?

Thanks
Don