I have a seal kit that includes the wing window seal. Does anyone have diagrams/instructions on how to remove the old and install the new?
Thanks.

I could use the same!! Any body?

67 OHC:
I have a gentleman in Houston who is looking into this for me since I have had no response here. If he get some info, I will pass it on to you as well.
Thanks.
Steve

I just wonder who the gentleman in Houston is that is looking into this....I dont know any 67 owner here in town....know of 6 69 owners...when you find out who it is pls let me know who, where , email etc...my e-mail bsefeldt@mhinc.com
thx, Bjorn
(Houston Tx)

Just did this during the weekend. I will try to explain as easzy as I can, just remember taht the whole track needs to come out.

Take door panel off

Remove nut behind panel that is holding bottom of track

Remove nut on hinge side of door (in Jamb) that is holding side of track

Remove screw(in Jamb)on top side of track.This one is hidden behine the weatherstrip on the top corner of the door.

Now the whole track should pull out and you can take it from there.

Hope this helps. Took me a while to figure it out for myself. But omly 15 minutes to do the other side.

Excellent instructions 67OHCBird. Thanks for the reply.