I am putting my 400 HO motor back together and wanted to see if someone could take a pic of how the fulel line mounts coming from the fuel pump to the carb. think there has to be a mounting bracket somewhere
Restored by me. Not a professional. Restaurant worker by trade. YouTube forums and some trial and error built this beauty. Sheet metal replacement. Body work. Paint. Rear gears. Interior. And engine. ALL ME. Toot toot
or maybe its just hard piped up and has no mounts just floats
Restored by me. Not a professional. Restaurant worker by trade. YouTube forums and some trial and error built this beauty. Sheet metal replacement. Body work. Paint. Rear gears. Interior. And engine. ALL ME. Toot toot
X2. You can get a line from OEM pump to carb. Note: you need filter inside carb fitting
Try to get both pump and line from same vendor. Be careful, some of the pumps have output fitting in wrong position. Bent pipe needs to match loc of pump and carb.
Engine Test Stand Playlist: https://www.youtube.com/playlist?list=PLwoxyUwptUcdqEb-o2ArqyiUaHW0G_C88 restoring my 1968 Firebird 400 HO convertible (Firedawg) 1965 Pontiac Catalina Safari Wagon 389 TriPower (Catwagon) 1999 JD AWS LX Lawn tractor 17hp (my daily driver) 2006 Sequoia 2017 Murano (wife's car) 202? Electric car 203? 68 Firebird /w electric engine 2007 Bayliner 175 runabout /w 3.0L Mercuiser__________________________________________________________
Weaving the pre-bent fuel line up through the maze of stuff is like one of those mind teaser puzzles. I've done it three or four time and each time I do it I scratch my head and swear. And then magically is slides up through and all is well. I keep wondering if there is a trick to this.
Weaving the pre-bent fuel line up through the maze of stuff is like one of those mind teaser puzzles. I've done it three or four time and each time I do it I scratch my head and swear. And then magically is slides up through and all is well. I keep wondering if there is a trick to this.
Here is the trick...back the car onto the street, take pants off, proceed to insert prebent line thru largest opening, turning as you push it deeper towards the female fitting on your mate. Tighten up the nuts and run some gas down the pipes. lol
2012 Mustang Boss 302 #1918, Competition Orange. FGF replacement 2006 Mustang V6 Pony, Vista Blue. Factory ordered. 2019 BMW X3 (Titled to the wife, but I'm always driving it for her. So I'm claiming it) Old projects, gone but not forgotten: 1967 FB 400, original CA car. After 22 years of work, trashed by the guy who was supposed to paint it. I had to sell it. 1980 Turbo Trans Am 1970 Mustang fastback, 351C 4Bbl, auto 1988 Mustang GT, 5 speed 1983 F-150 4x4, built 302 1994 Chevy K2500 HD 4x4, 454 TBI