Thanks all! I think I'll go with Tom's idea of the heaver spring. I do like the fact that a stock starter is more readily available and less costly.
Originally Posted By Thomas Brandl
I run the R.A.R.E. long branch D-port factory headers including the correct R.A.R.E. oil filter adapter with my 400 cci and TH400. Nevertheless had to switch to one of the smallest oil filters available (FRAM extra guard PH3675; http://www.hardwareandtools.com/invt/5853155# ) because of limited space... Less than 1/2 inch of clearance...
Geez Thomas, that tight! I would have scraped the LB oil filter adaptor idea and gone with a remote oil filter set up.
Originally Posted By 69firebirdman
i think banshee's idea is the best one.why spend 200 on those dorky looking thinkamagiggs
Terry, I’m not familiar with that technical jargon.
