Thanks. I have a good selection of mill files, I'm not sure about a deburring stone. I will have to check my inherited tool and die box.

I posted a new thread about the Q-Jet well plugs...how to epoxy them as recommended. There appears to be leakage on the base gasket from several spots. I don't know Q-Jets, having played mostly with Carter T-Quad and Holley 2 bbl.

HUGE difference in the chain tension with the new chain installed! No real slack at all, just enough to keep it from binding. I actually had to keep the cam and crank gears moving in evenly to install. Taking it off I was able to pull the cam gear nearly off before moving the crank gear.

Off to the EDM shop...