Hit a snag today; found 4 more convertible braces that will need to be eradicated from the wreckage that was the original car. Two are under the front body mounts and two are at the trunk drops under the vibration dampers. What’s up with those things, I have never noticed them in anything else, are they effective they sure are heavy.


I spent the day pulling parts back off and Have begain welding the trunk pan, frame rails, seat brace and inner fenders, I did not take any pics to day.

I have over 100 pics of this project so far, if there is somthing you would like to see the other side of, I bet I have a pic