I have my body sitting on a 2"x 6" board under the rear part of the rocker panels. The board is sitting on a dolly and the front of the car is sitting on the legs of an engine stand, also on a board. I can roll it around, and in and out of the garage. I did build a rotisserie, but have to get the rear frame rails installed before I can hook her up to it which won't be until next spring, if I'm lucky. The rotisserie bolts through the rear bumper mounts on the rear side and the subframe mounts on the front of the car. I'm on Long Island, NY and I guess metal costs more here, I paid almost 200 for the square tubing and about 90 for two engine stands from Harbor Freight. I got plans from the internet and modified them for my application. I have always done "overkill" on any project, so I think it will be strong enough to hold my car, but as yet haven't tried it. Good luck.