Hey guys. I have sought your help in building up my 68 Firebird and your knowledge has been great thus far. I recently bought a low milege 1967 400ci engine with an Ohio Crankshafts 455ci 4030 crank, 6X Heads and forged AutoTech pistons. The motor came with a Schneider 290H cam and a Hurricane intake. The motor was originally setup for a high RPM application and I want to make it more street friendly. It's going in my 68 Firebird with a Tremec 3550 trans (low 3.27 first gear) and 3.42 reared gears. I already have a Performer RPM intake and am looking for camshaft recommendations. The car it a street car that will never see slicks, but it is only driven on once days and driven hard. I's like a real choppy muscle car idle as well, and already have a vacuum canister for added power brake support.
