Yea I got that part. Filling and bleeding. I got all the air out. Struggles horribly. I loosened up the joints to the point its really sloppy. Still wont lift it from fully seated. And when it lifts its uneven. Further reading says thats the cylinders if its uneven and no air bubbles. I had a puddle on the floorboard in the morning. So even with a new seal kit its still leaking. Im going to replace the pump and both cylinders. Much later. Too much expense right now. And figuring out the wiring was most of what I wanted to accomplish. Moving on to better things. Got my paint for the dash and interior trim. Lots to do.