On the subject of tail panels, the shop that did the "rotisserie" work on the shell clamped the rotisserie thru the taillight area and the buggers flattened slightly about 3" of the lip around the tailight openings. The panel other than that is mint no bondo, no dents. I've been wondering the best way to fix the area but as you all know it is a pretty sensitive area to any type of hammering.

I was thinking of getting one of those dent guys over to do his thing and try and do the best he can, then grind and bondo as necessary to get it perfect. Any problem with straigtness in the tailight area can really show once the lights are in.

The other idea was to cut out the area and replace only the tailight openings but that may cause more trouble than it's worth.

Option 3 is replace the whole tail panel which I do not want to get in to.