First Generation Firebird Forums Tech Help General Pilot bearing - bronze or roller?

Print Thread

Rate Thread

Pilot bearing - bronze or roller? #59107 10/07/06 01:43 PM
Joined: Jul 2003 Posts: 4,243 Likes: 11 Upstate New York Bob S. Premium Member
Bob S. Premium Member Joined: Jul 2003 Posts: 4,243 Likes: 11 Upstate New York	What are the pro's and con's of each? The guy at Jegs says the roller bearing requires periodic lube while the bronze is meant to last a long period without maintenance. I don't plan on taking mine apart for a while after I do the clutch. I bought one of each so it's not a question of cost (bronze is a lot cheaper). Any advice or opinions welcome.

Google AdSence Sponsor for FGF Forums

Entire Thread
Subject	Posted By	Posted
Pilot bearing - bronze or roller?	Bob S.	10/07/06 05:43 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/07/06 05:54 PM
Re: Pilot bearing - bronze or roller?	Ron 67	10/08/06 06:26 AM
Re: Pilot bearing - bronze or roller?	333Fitter	10/09/06 01:26 AM
Re: Pilot bearing - bronze or roller?	drew67	10/09/06 03:09 AM
Re: Pilot bearing - bronze or roller?	ho4spdtogo	10/09/06 05:07 AM
Re: Pilot bearing - bronze or roller?	Fbody69	10/09/06 03:43 PM
Re: Pilot bearing - bronze or roller?	Bob S.	10/11/06 10:49 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/11/06 10:55 PM
Re: Pilot bearing - bronze or roller?	greg fielder	10/12/06 01:26 AM
Re: Pilot bearing - bronze or roller?	Bob S.	10/12/06 05:50 AM
Re: Pilot bearing - bronze or roller?	sixstarved	10/12/06 07:00 AM
Re: Pilot bearing - bronze or roller?	greg fielder	10/12/06 03:00 PM
Re: Pilot bearing - bronze or roller?	mik	10/12/06 09:25 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/12/06 09:30 PM
Re: Pilot bearing - bronze or roller?	Bob S.	10/12/06 11:15 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/12/06 11:18 PM
Re: Pilot bearing - bronze or roller?	nashville68bird	10/13/06 06:01 AM
Re: Pilot bearing - bronze or roller?	Bob S.	10/14/06 03:17 AM