First Generation Firebird Forums Tech Help General Pilot bearing - bronze or roller?

Print Thread

Rate Thread

Re: Pilot bearing - bronze or roller? 333Fitter #59200 10/08/06 11:09 PM
Joined: Jan 2006 Posts: 2,131 midwest , usa D drew67 Member
drew67 Member D Joined: Jan 2006 Posts: 2,131 midwest , usa	i have had better luck with the bronze than the rooler. i have had new rooler bearings lock up witin 10,000 miles where as the bronze merely reqiures you to properly install it! andy Andy due to budget cutbacks, the light at the end of the tunnel has been disconnected for non payment.

Google AdSence Sponsor for FGF Forums

Entire Thread
Subject	Posted By	Posted
Pilot bearing - bronze or roller?	Bob S.	10/07/06 05:43 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/07/06 05:54 PM
Re: Pilot bearing - bronze or roller?	Ron 67	10/08/06 06:26 AM
Re: Pilot bearing - bronze or roller?	333Fitter	10/09/06 01:26 AM
Re: Pilot bearing - bronze or roller?	drew67	10/09/06 03:09 AM
Re: Pilot bearing - bronze or roller?	ho4spdtogo	10/09/06 05:07 AM
Re: Pilot bearing - bronze or roller?	Fbody69	10/09/06 03:43 PM
Re: Pilot bearing - bronze or roller?	Bob S.	10/11/06 10:49 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/11/06 10:55 PM
Re: Pilot bearing - bronze or roller?	greg fielder	10/12/06 01:26 AM
Re: Pilot bearing - bronze or roller?	Bob S.	10/12/06 05:50 AM
Re: Pilot bearing - bronze or roller?	sixstarved	10/12/06 07:00 AM
Re: Pilot bearing - bronze or roller?	greg fielder	10/12/06 03:00 PM
Re: Pilot bearing - bronze or roller?	mik	10/12/06 09:25 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/12/06 09:30 PM
Re: Pilot bearing - bronze or roller?	Bob S.	10/12/06 11:15 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/12/06 11:18 PM
Re: Pilot bearing - bronze or roller?	nashville68bird	10/13/06 06:01 AM
Re: Pilot bearing - bronze or roller?	Bob S.	10/14/06 03:17 AM