First Generation Firebird Forums Tech Help General Pilot bearing - bronze or roller?

Print Thread

Rate Thread

Re: Pilot bearing - bronze or roller? ho4spdtogo #59239 10/09/06 11:43 AM
Joined: Sep 2001 Posts: 14,265 Michigan F Fbody69 Valued Mentor
Fbody69 Valued Mentor F Joined: Sep 2001 Posts: 14,265 Michigan	Bronze is the low performance end of the pilot bearings. Bearings have been around a while and they aren't scary and they don't fail all the time if they are installed properly and lubed when you change the clutch. It's not like bearings are touchy and bushings are easy. You can mess up a bushing real easy too.

Google AdSence Sponsor for FGF Forums

Entire Thread
Subject	Posted By	Posted
Pilot bearing - bronze or roller?	Bob S.	10/07/06 05:43 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/07/06 05:54 PM
Re: Pilot bearing - bronze or roller?	Ron 67	10/08/06 06:26 AM
Re: Pilot bearing - bronze or roller?	333Fitter	10/09/06 01:26 AM
Re: Pilot bearing - bronze or roller?	drew67	10/09/06 03:09 AM
Re: Pilot bearing - bronze or roller?	ho4spdtogo	10/09/06 05:07 AM
Re: Pilot bearing - bronze or roller?	Fbody69	10/09/06 03:43 PM
Re: Pilot bearing - bronze or roller?	Bob S.	10/11/06 10:49 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/11/06 10:55 PM
Re: Pilot bearing - bronze or roller?	greg fielder	10/12/06 01:26 AM
Re: Pilot bearing - bronze or roller?	Bob S.	10/12/06 05:50 AM
Re: Pilot bearing - bronze or roller?	sixstarved	10/12/06 07:00 AM
Re: Pilot bearing - bronze or roller?	greg fielder	10/12/06 03:00 PM
Re: Pilot bearing - bronze or roller?	mik	10/12/06 09:25 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/12/06 09:30 PM
Re: Pilot bearing - bronze or roller?	Bob S.	10/12/06 11:15 PM
Re: Pilot bearing - bronze or roller?	Fbody69	10/12/06 11:18 PM
Re: Pilot bearing - bronze or roller?	nashville68bird	10/13/06 06:01 AM
Re: Pilot bearing - bronze or roller?	Bob S.	10/14/06 03:17 AM