Thanks for the effort.. I checked the numbers on the piston tops and they are { L2262F .030 }... below that are the numbers {05-176-01B }... I did not see any name on the piston top... As far as I can tell measuring from the top of the deck to the top of the lowest piston is 3 3/4" of an inch.... hope this helps....as far as the cam goes it's a Comp Cam,, { Part # 51-314-4 },,.. { grind P8 280AH-10 }......... {Gross Valve lift intake .481 ,, exhaust .481 }... Duration @ .050 intake 232.. exhaust 237 .... Stainless valves with dual springs & hyd. lifters... Thanks again... Dale
What about the size of the cam,, is it going to perform pretty good and is it going to sound cool,????,, or can I do or should do better..?????
