Hello all, I have a 326 with a fresh rebuild, I bought the car off this sites classifieds.
The motor is strong, 3K miles on it. 4 speed behind it.
Since it's purchase I have had to slip the clutch at take off from a dead stop, or the car will kill.
The previous owner put in an Edelbrock cam, intake and carb. I have the paperwork for the cam at home, so I can find out it's specs if needed.
The gears in the rear were 2.50's, I swapped out the axle this last weekend to a '79 TA rear with 3.23's with a posi. This made a pretty good difference in the gearing, but it still seems to lack take off power from a dead stop.
I replaced the distributor with HEI, the previous distrib the bearing froze up on.
I'm wondering what would be some good things to look at, once the rpm's get up this car screams, runs very well.
