|
|
Joined: Apr 2000
Posts: 1,536 Likes: 4
Site Admn
|
|
Site Admn
Joined: Apr 2000
Posts: 1,536 Likes: 4 |
Find companies specializing in radio restoration for the First Generation Firebird.
|
|
|
|
|
Joined: May 2003
Posts: 127
Member
|
|
Member
Joined: May 2003
Posts: 127 |
Well, I bought a '66 AM radio for my Mustang that ended up not working when I got it. It was beautifully rechromed and everything though!
So, I finally got around to getting it fixed. I wanted a local shop in Atlanta if possible and I did find a good one:
Auto Audio Service & Restoration Company 1200 CENTRAL AV EAST POINT, GA 30344 (404) 762-5350
The shop is owned by a guy named Hans (he told me a story about fixing these radios way back when they were brand new...he's got a lot of experience) who does the mechanical type restoration work and the rest of the business seems to pretty much be run by David who does the electricals.
I shipped them the radio since I didn't have time to drive down there during the week and they had it fixed in about 4 days. Hans took the time to get the push buttons working perfectly and David found/fixed an internal short and dialed in the tuning. They also cleaned everything inside and out.
Hans also recommended an original style speaker that he had...I needed one so I got it.
For everything the price was $103.00 which is very reasonable considering the speaker, parts, and labor to get it working.
I will use them again. Dan
|
|
|
|
|
Joined: May 2003
Posts: 127
Member
|
|
Member
Joined: May 2003
Posts: 127 |
I bought a '69 AM radio from Terry so that I could have the digital AM/FM Stereo conversion done to it. After searching for a long time and calling tons of people I decided to have the work done by Gary Tayman of Tayman Electrical ( http://www.taymanelectrical.com ) and I was very happy with the quality of the work. He did the conversion and cleaned up the rest of the radio and I got back a great looking and sounding radio. Dan
|
|
|
|
|
Joined: Jul 2000
Posts: 9
Member
|
|
Member
Joined: Jul 2000
Posts: 9 |
This was posted on the mailing list, so I figured I'd document it here...
</font><blockquote><font size="1" face="Verdana, Helvetica, sans-serif">quote:</font><hr /><font size="2" face="Verdana, Helvetica, sans-serif"> All, I just got the original dash speaker reconditioned from a place here in Michigan as per reccommended by one of the listers (can't remember who, but thanks for the tip!).
Excellent work for a great price! My speaker basically disintegrated when I touched it (the cone), and there was a bit of rust on the connections to the cone. For $41.95 got a speaker shipped, re-coned, new coil, and new screen mesh. It sounds and looks great!
Jackson Speaker Service Ron McGee, Jackson, MI 517-789-6400 3921 Pinecrest Court Jackson, MI 49203
Just thought I'd pass along a good quality repair shop...
Don Rogers '69 350 Coupe</font><hr /></blockquote><font size="2" face="Verdana, Helvetica, sans-serif">
Procrastination is the key to flexibility.
|
|
|
|
|
Joined: Mar 2003
Posts: 14
Member
|
|
Member
Joined: Mar 2003
Posts: 14 |
Another good place to get old radios repaired is Precision Radio in San Antonio, TX. He has done three different old Delco radios for me and they have worked flawlessly. He is a Delco factory trained technician with more than 30 yrs experience. Contact info: Precision Radio John Henshaw 1210 Warfield San Antonio, TX 78216
Wayne, TX 210-979-0905
|
|
|
|
|
Joined: Feb 2008
Posts: 7
Member
|
|
Member
Joined: Feb 2008
Posts: 7 |
I bought a '69 AM radio from Terry so that I could have the digital AM/FM Stereo conversion done to it. After searching for a long time and calling tons of people I decided to have the work done by Gary Tayman of Tayman Electrical ( http://www.taymanelectrical.com ) and I was very happy with the quality of the work. He did the conversion and cleaned up the rest of the radio and I got back a great looking and sounding radio. Dan I have used Gary for 2 of my radios. My cars paperwork both show AM radios, but what a pain. Had Gary T. convert them to AM/FM. Very happy with the work,
|
|
|
|
|
Joined: Dec 2007
Posts: 10,338 Likes: 3
Premium Member
|
|
Premium Member
Joined: Dec 2007
Posts: 10,338 Likes: 3 |
Hello all, I just recieved my '67 AM/FM radio back from being cleaned and restored. These guys did a wonderful job! I also purchased a new replacement dash speaker from them as well. Their replacement speaker frames are stamped exactly like stock so they clip right in with the stock brackets. I would highly recommend them. http://www.turnswitch.com/They are located in Blaine, Minnesota.
I used to be indecisive. Now I'm not sure. I feel like I am diagonally parked in a parallel universe. 1968 400 convertible (Scarlet) 1976 T/A - 455 LE (No Burt) 1976 T/A New baby, starting full restoration. 1968 350 - 4 speed 'vert - 400 clone (the Beast!) 1968 350 convertible - Wife's car now- 400 clone (Aleutian Blue) (Blue Angel) 2008 Durango - DD 2008 GXP - New one from NH is AWESOME! 2017 Durango Citadel - Modern is nice! HEMI is amazing! 1998 Silverado Z71 - Father-daughter project 1968 400 coupe - R/A clone (Blue Pearl) (sold) 1967 326 convertible - Sold  1980 T/A SE Bandit - Sold
|
|
|
|
|
Joined: Feb 2005
Posts: 783
Member
|
|
Member
Joined: Feb 2005
Posts: 783 |
Would you mind telling us what you paid for the restoration of your radio...?
|
|
|
|
|
Joined: Dec 2007
Posts: 10,338 Likes: 3
Premium Member
|
|
Premium Member
Joined: Dec 2007
Posts: 10,338 Likes: 3 |
The reproduction speaker was $40, and the radio restore was $150.
They blasted and re-painted the exterior box, cleaned and lubed all moving parts, cleaned and polished the lens and chrome parts, and replaced an internal bulb.
The radio worked before sending it in, just not very well. They can repair non-working radios as well.
Their initial (non-show car quality) estimate was $130 to $200. So they fell well within that range. Show quality is more, but I didn't ask more about that.
I had checked three other repair / restoration shops before hand and was quoted $200 to $500 for similar restoration.
I used to be indecisive. Now I'm not sure. I feel like I am diagonally parked in a parallel universe. 1968 400 convertible (Scarlet) 1976 T/A - 455 LE (No Burt) 1976 T/A New baby, starting full restoration. 1968 350 - 4 speed 'vert - 400 clone (the Beast!) 1968 350 convertible - Wife's car now- 400 clone (Aleutian Blue) (Blue Angel) 2008 Durango - DD 2008 GXP - New one from NH is AWESOME! 2017 Durango Citadel - Modern is nice! HEMI is amazing! 1998 Silverado Z71 - Father-daughter project 1968 400 coupe - R/A clone (Blue Pearl) (sold) 1967 326 convertible - Sold  1980 T/A SE Bandit - Sold
|
|
|
|
|
Joined: Feb 2005
Posts: 783
Member
|
|
Member
Joined: Feb 2005
Posts: 783 |
Thanks for the info. Seems to be a very reasonable price to me...
|
|
|
|
|
Joined: Jan 2010
Posts: 794
Premium Member
|
|
Premium Member
Joined: Jan 2010
Posts: 794 |
There is a guy in so cal named Joe Viji. reasonable and knows his stuff Joe Vijil 234 West Walnut Ave. Monrovia, CA 91016 JVrestorations 626 264-7233
86 Pontiac 2+2 69 Firebird Coupe(Under Construction) 69 Firebird 4 speed Vert Driveable but Under Construction 64 1/2 Mustang (Under Construction) 86 Z28 Convertible Weekend driver
|
|
|
|
Forums57
Topics35,546
Posts298,900
Members8,865
| |
Most Online19,810 Feb 1st, 2026
|
|
|
1 members (Jimc2002),
114
guests, and
19
robots. |
|
Key:
Admin,
Global Mod,
Mod
|
|
|
There are no members with birthdays on this day. |
|
|
|