The only part # we have is 9786819, power steering ,no ac ,2 groove. That info came from the firebird site, we are not sure it is correct. We have bee using the pulley measurement of the pulley sitting on a flat surface to the top surface to the top flange where the fan attaches should be2 7/16 high . this is based on pulley #9796060xf which means the pulley has to move out5/16 by shortening the height of the pulley cone.
I have a 9786819 pulley. Not sure if that is what you are looking for.
David
http://FirstGenFirebird.org/show/closeup.mv?CarID=571 If i don't get this car back on the road soon i'm gonna go postal! On a quest for FGF knowledge 1968 Pontiac Firebird Convertible 1969 Oldsmobile Cutlass "S" Convertible *Sold*
http://FirstGenFirebird.org/show/closeup.mv?CarID=571 If i don't get this car back on the road soon i'm gonna go postal! On a quest for FGF knowledge 1968 Pontiac Firebird Convertible 1969 Oldsmobile Cutlass "S" Convertible *Sold*
Sorry David. Was interrupted by "Irene". Back on line. I need to check again with my restorer this week to confirm the part number. Thanks for your patience.
No problem Bob. A lost password and changed internet provider and I haven't been logged in as a member for 3 years finally figured out how to get back on board here.
Let me know.
David
http://FirstGenFirebird.org/show/closeup.mv?CarID=571 If i don't get this car back on the road soon i'm gonna go postal! On a quest for FGF knowledge 1968 Pontiac Firebird Convertible 1969 Oldsmobile Cutlass "S" Convertible *Sold*
I just became a member this week. I have 1968, 1969, 1972 and 1975 Pontiac Illustration and Parts Catalogs so let's see if I can help. According to the 68 and 69 books, a 9786819 is a 2 groove 8" O.D. pulley used on 1968 V8s with power steering and without AC. If your car has AC, the pulley number should be 9788886 which has a 5 11/16" outer diameter.
finally figured out how to get back on board here.
