Hey, Ya'll~

I couldn't remember my password so I had to create a new account. I'm in San Antonio with my son who was injured in Afghanistan (Army); He's doing great and will recover.. To the point...

I'm going to be driving from San Antonio to Massachusetts and I was hoping someone along the way may want to part with as close to an OEM #'s matching 350 HO motor as I can get.

Any sellers out there?

Thanks!

Wade

I have a 71 ramair block with crank,rods,& pistons bored .030 over with casting 481988
I also have the original ramair heads that were on it casting 96.the heads have roller rockers and have been milled .010 for flatness.
This motor was originally rebuilt 20 yrs ago and wrapped in plastic without oil pan,valley pan,& valve covers.It was stored in a barn the whole time but lost the plastic some years ago.the block has surface rust and must be disassembled & cleaned.cylinders have very little surface rust and probly just need to be honed.
The heads were removed about a month ago and somehow didnt rust like the outside of the block.missing oilpan,valleypan,valvecovers,distributor,timing cover,&oil pump.Have holley street dominator intake,starter,flywheel,clutch,pressureplate.

Live in kentucky.

Hi,
Are you still seeking a 1969 350 HO motor? I have one available. It came out of a 69 Firebird and has the #48 Ram AIR III heads. I purchased the engine without an intake manifold, carburetor, or exhaust manifolds. I bought it to get the heads which currently reside on my 67 Firebird convertible. They had a complete three angle valve job using the correct Pontiac angles less than 1000 miles ago. I would be willing to part with the engine and heads. If you are interested, let's talk. I am in Flowery Branch, GA. Send me a private email at [email protected] to get my phone number.

Thanks,
Greg (k8gs)