I've got to let her go, 1967 Firebird Convertible project car now parting out. Body has lots of rust but parts listed below and more are in great shape. I'm new to First Generation Firebird and joined because I need to sell everything, so, I did a little research and came up with some prices but if they are out of line then make me a good offer. My telephone is for business so contact me first by email (slmrides@gmail.com), reply to this post or PM. I'm posting pictures as I pull parts from the garage (see link below). All of the parts are just as I honestly describe them. RM - EP series epoxy primer was used where noted. I'm in Springfield, Illinois and will work with you on shipping but I've never sold parts on the internet so I don't know what can be easily shipped and what you might have to pick up.

Link to pictures: https://picasaweb.google.com/slmrides/Fi...feat=directlink

Front bumper - good shape original from a 400 car (holes for emblem) but some surface scratches and very light rust - chrome pealing to nickel plating in corners - $75

2 hoods - not 400 - one in great shape - other one has new metal in the nose - $150 each

Cowl panel - primered - $75

2 radiators - not sure of current condition - make offer

2 fan shrouds in good shape - $40 each

Radiator support - no rust through - sandblasted and primered - $75

Subframe is straight but donut mounting points are rusted out (I have kit with new metal to weld in) - suspension was completely rebuilt in the late 80's (stopped driving in 1993) - make offer

Cocktail shaker bottles - all four - make offer

Fender right side from Camaro - nose dented but repaired - no rust through anywhere - lightly sandblasted in corners and primered - need holes drilled for Firebird emblems - $150

Fender left side is from a Firebird - no rust through in front of wheel - rust behind wheel repaired with new metal - somebody used a torch to remove rusted bolts but I've started welding up holes to repair - lightly sandblasted in corners and primered - $100

Fender wells both sides are strong but need some new metal in places - make offer

Fender extensions for 67 Firebird - left and right - sandblasted and primered - $40 each

Valance for front - good condition - $75

Doors - left and right - no rust through across bottom but left side has some rust holes in front inside corner - outside corners repaired with new metal - outside primered - glass, regulators and latches included - $150 each

Floors - aftermarket repair panels - full left and right - left side cut to fit convertible - $50 - right side is uncut - $75

Deluxe interior - all pieces but door panels are in bad shape - white seats can easily be recovered - make offer

Steering columns - extra one and original - cracked plastic - $75 each

Convertible mechanism worked when I stopped driving in the 90's - I'll confirm it still works if you want the hydraulics - make offer

Extra door pillar corners cut from a Ziebarted car - $25 for 3 corners

Quarterpanel skins - left and right - aftermarket - $75 each

Trunk lid #1 - no rust but slots cut in bottom to access nuts for spoiler (holes now welded shut) - $75

Trunk lid #2 - rusted edge was repaired once but needs attention - $50

Rear spoiler - cracked but repairable - $50

10-bolt rearend and mono-leaf springs - not positraction - make offer that will convince me to pull it from the car

Pontiac Quadrajet intake manifold - $50

I have lots of other parts (the 326 engine is gone but I have accessories). Let me know what you need and I'll look for it in the basement and garage. Thanks guys for helping me out.

Odds and ends:
Offenhauser dual quad aluminum intake for SB Chevy - $150
4 Rally wheels from seventies Camaro - only three trim rings and center caps - make offer

Do you still have the factory traction bar and bracket?

plmcrzy, yes, I have the factory traction bar. It's on the car and probably rusty but should be good otherwise. I'll try to remove it and then let you know the price based in part on the difficulty getting it out.

ok, thank you

Do you have any rear seatbelts? I'm looking for a black set.
My car is a 68 but I think the seatbelts are the same.
I'm looking to add a seatbelt in the center of the rear seat.

PM sent

Yes, I have the full set of seatbelts but you have to buy all of them. I'll get a picture up and figure out a price.

Another thing I just remembered that I need is the chrome around the front drivers' side wheel well.
For some reason when my dad bought this car back in 1975, it was missing. Neither he nor I has done any restoration on this car, but I'm trying to at least make it complete.

I don't believe I have any good wheel well chrome.

plmcrzy, I sent you a PM regarding the traction bar.

Do you have stainless driver's side exterior A pillar molding?

Do you have the front windshield trim?

Sent a PM to slm1967.

Yes, I have these trim pieces.

PM sent to slm1967

I no longer have these items:
fenders and fender extensions and inner fender wells
one steering column
cocktail shaker bottles
tail lights
rear quarter repair panels
seats

pm sent

Do you have the pillar post moldings?

Yes, Blaise, I still have both pillar post moldings. I'll send you a PM with price.

Do you have a good motor for the convertible top,taillight housings and lenses and the 2 close out panels that go from the bumper to the radiator support

Kelly, I do not have a good top motor and the taillights are sold. I believe I have those panels and will try to get a picture up on Sunday.

If you have the panels we want them. let us know price and shipping. Thanks Pics would still be nice, but need the panels

pm sent

thanks for the part~!

Would you have the driver side rear 1/4 glass?Is it tinted?What would you be asking for it shipped to 01077.Thanks

I do not have any rear quarter glass.

do you have the spindles and hubs for the front drum brakes? thanks

I no longer have the spindles and hubs. If you will PM your contact info I will pass it along to the guy who bought the body and subframe.

I'm interested in the full set of seat belts. Very serious- PM condition & price. Thanks, Jim

Do you have the body dampeners (cocktail shaker); I'm looking for the 2 rear ones that go in the trunk.

Sorry, I've sold the seatbelts and the cocktail shakers.

We are also looking for body dampeners (cocktail shaker); We are looking for the 2 rear ones that go in the trunk.

We are hoping you still have the door panel trim, interior quarter trim and and a set of horns.

If you you no longer have our phone #. Let us know. We will be glad to go ahead and pay the shipping costs.

next for the traction bars please email my address.the68buick@hotmail.com chris

needing windshield wiper switch,knob and bezel , cigarette lighter,holder and bezel. did your car have the astro vents in the dash

Catching up with you guys and your parts inquiries. I still have a passenger side traction bar for $100 plus shipping. The body shell is gone and so is the dash but I have the glove compartment door and cardboard inside as well as the AM radio and bezel. I also dug up lots of new, reproduction weatherstripping. It's best to email me directly with your parts needs and prices: slmrides@gmail.com

Any convertible parts left?

Looking for the cocktail shakers - fronts in good shape, no cancer and the convertible top parts.

I do not have any of the convertible mechanism nor cocktail shaker bottles. I do have a convertible top switch but I'm not sure if it works. Email you parts inquiries to slmrides@gmail.com