Swapping car over to a stick, anyone have a pilot bearing number that's good I can order from Napa or where ever?
Thanks, Ron

I used C-0649-1 from npd.

fYI- Make sure your crank is drilled for pilot bearing.

Don't let them try to pawn off a chevy pilot bearing. They are totally different.

http://i32.photobucket.com/albums/d9/strugar/PICT3534.jpg

Left chebby, right poncho

BOP has 'em. It's at the bottom of the page on their site at this link.

http://www.bopengineering.com/beltdrive_acc_topend5.shtml

Just bought a pilot bearing for my '68 Firebird. Got it at O'Reilly auto parts. National Bearing 7109. Cost was $22.99.

Dan

Thanks guys I will measure crank to see if it is able to accept one..

Every crank I've ever seen is drilled, auto or not.

Someone told me that somewhere around 72-74 and up cranks from a auto were not drilled. I don't know cause I've only seen a 70 auto and it was drilled. I have heard people starting a swap and invested in parts and then found out the crank was not drilled for it.