Here is a list of parts I am ready to find new homes for: All are used, originals. I can email pictures, respond or send me a PM. Shipping not included.

350 - 2bl air cleaner assembly - $25
350 original 4 blade fan - $20
Pair of sill plates - $15
Front cocktail shakers for '69 'vert. Blasted and primed. $130/pair
Inner rear quarter window convertible braces (for below the kidney covers) - $80
Misc chrome trim (coupe and 'vert) - inquire
'68 burlwood dash surround - $80
Repop '67 vent window seals - $10
Repop '68-'69 door weatherstrip - $25 (I think OER brand)
More stuff, I'll add to the list as time permits.

Can i get pictures of the door sills, and do you possibly have the chrome trim for the drip rails?

PM me your email address, and I can send them in the morning.
I do not have drip rail chrome, sorry.

Added today:
'68 door window crank gears assembly for standard interior. $40.
'68 burlwood ash tray - $25
Chrome repop valve covers for '67. - $50.
Chrome repop breather caps for '67 - $25 (have two)
th400 cable (I believe from '68) - $20
'68 rally dash cluster - $150
original '68-'69 chrome air cleaner lid. Rust and pits, would need to be re-chromed. -$10 (looks rusty)
original '68-'69 chrome air cleaner lid. Rust and pits, would need to be re-chromed. -$20 (still shiny)
Original convertible bottom frame x-brace. Nice condition -$80
Black '68 interior driver's side windshield piller trim - Decent - $25

PM sent.

you don't have a complete air cleaner by any chance? (68 400 Firebird 4 barrel)

Sorry, no. Just the lids and the 350 air cleaner.

I also have used '68 door glass and coupe quarter window glass.
350 intake and original 2 bl carb.

Bird glass?

I have one driver's side tinted bird glass, and one soft-ray (clear) driver's side bird glass.

No passenger side bird glass.

I have a few pairs of non-bird glass soft ray pieces.

Coupe quarter glass is clear. No 'vert quarter glass.

Rally gauges sold.
Chrome trim sold

Do you still have the air cleaner?

Yes

Shakers sold.

How much shipped to 37862?

Thanks, I'll pass for now.

Went through a few more boxes today:
5 misc '68 door hinges. $5 each (already sand blasted) (not a matched set of 4)
pair of hood hinges and springs. Rivets seem tight. $40
Headlight frames and assemblies '67-'68 $40
hood latch assembly, verticals, plate with spring, '68 latch $80
400 dash gauge pod, 160 MPH speedo, fuel gauge, high beam wire - very nice $80 (not rally gauges)
rear defroster with wires and cover. Might be early second gen, not sure $80
pair of coupe rear seat upper side panel metal trim (curved metal pebble finish pieces) $40
Nice set of repop rally II caps. Black centers. Some pitting on chrome, but still shiny $30
One set of NOS rally II caps. Black centers, still in GM wrappers. $180.
Metal repop trunk reinforcement strips (for underside where fuel tank straps connect) $30 / pair
Many other misc parts, mostly for '68.

I can send pictures if interested. Prices do not include shipping.

NOS rally caps, sale pending.

Have you come across the 68 dash that you were going to sell me last year?

I thought you picked one up locally?

I have an aftermarket one. Not very impressed with it. I would like to have a stock one to have recovered a little down the road.

I think I have one in the garage. Haven't looked sine the last time we spoke.

Good afternoon,

Looking for 1968: Gauge pod lense and surround (black), both kick panels for AC car with passenger side flapper, rocker moulding trim mounting brackets, gas door bird emblem, 3 spd automatic shifter, front turn signal lenses (both sides, single bulb), 2 Rally II (JC) 14 x 6 rims and 4 trim rings, both rear wheel well mouldings, driver's side lower convertible (if different from coupe) windshield trim piece, convertible wiper arms, and AC glove box. Hoping for driver quality or better. Let me know if you can help. Thanks!

Do you only need the pod lense, or the whole pod? I may have one or two rocker brackets. I think i may have the front marker assemblies. Do you need the lenses too, or just the metal assemblies? That's all I have from your list.

Rear defroster sold.

PM Sent.

I am interested in some of the parts - please call me at 269-423-2637 - Bob

Do you have the bracket that holds the heater hose away from the engine? Non AC, bolts to the engine near the front. Funny thing, my 68 doesn't have AC but has the heater hose bracket on the inner fender well.

All '68's had the bracket on the inner fender. '67's had the brace mounted to the front of the engine block.

If you want a bracket like that, you need to specify '67 model year.

do you still have the 350 2bl air cleaner

do you still have the 350 2bl air cleaner

Yes. Sent PM.

Thanks. Don't need it now. I saw it in the parts catalog Group 8.500 Illustrations 2 and 3, and wanted to stay as close to original as possible. The catalog groups 67 and 68 together on most lists.

Still looking for a manual shift center console.

PM sent!

Hi just a quick inquiry do you still have the 68 Hood latch [censored] available , if so could you please email me on
micholden@optusnet.com.au, asap, your help would be greatly appreciated. regards michael

do you still have the 68 hood latch assy available, I am interested if still available

350 2 bl air cleaner sold.

Hood latch and 350 air cleaner sold.

Did you ever find the 68 dash pad?