For a 69 w/AC, can someone please post a picture of each spark plug wire retainer and where/how each is attached?

I purchased a kit but it did not come with instructions and I have no clue where to start. I see a lot of variations doing a Google image search but would like to replicate the stock config as best possible.

Thanks!! Alex

Here are some photos from my files of the originals on my '68 w/AC. I had removed the wires on some so the loom/retainer is a bit easier to see.
Edit: I went through my photos and found one of the right front.

Left Front


Left Rear


Left Upper Rear


Right Upper Rear


Right Lower Rear


Both Right Rear (Upper and Lower) Together


Right Front

Note that I edited my previous post. "Upon further review" I recalled that I had a photo of my front right loom/bracket/retainer and that it is different from the non-AC.

Thank you!!