Does anyone out there have a diagram and measurements for the hole for the front antenna on my 67 bird? I can't believe you would hald to buy something like that. I saw some templates for the right front fender but they want to sell them. Help would be appreciated
If you think it would be the same as a 69 I can measure to outside of my antenna and send that info on to you. I did have a template for the 69 and will look for it if you think it will help.
I just welded up the antenna hole on a fender that will eventually be on my 67. It has a rear antenna.. Are you sure you need an antenna? Always call Ames. They have all kinds of stuff like that and they will e-mail it to you for free.
After looking all over I came up with a great plan. the front antenna is aprox. 4 5/8 from the door and aprox. 5 3/8 from the hood. hope this helps anyone out there. it is an 1 1/8" hole with a small cutout towards the center line of the hood about 1/8" square