Thanks for the replies. I wish I saw your post regarding doing your lines for $12. I did order the pre bent lines but was on a trip to Montana and they delivered to the hotel for free because I ordered some other stuff as well but was still over $100. Like I mentioned the lines all came off 2+ years ago and were pretty badly rusted. I have them in pieces but there is no valve there. When I matched up the pieces to where it would run under the car it is solid line going from the back to past the subframe. Only valves are the two different ones by the master cylnder/Brake booster. Any idea if a person can get this valve that goes under the door? Sure wish I took pictures back then....first mistake of many along this journey.