I tried to call and use summit tech line but was on hold forever! I just went old school and just did trial and error. Because I was overthinking this and everyone was convinced this is hard to do I took it in and out about 12 times. Finally I landed on a really nice pattern, I put it back together yesterday and took it out for a ride.

Knowing I need a break in period before getting radical I just took it around the block to check operation. Guess what, couldn't here a single sound. Operates perfect. Just goes to show what you can learn here and from you tube videos.

My only comments for anyone else attempting, you got to have all the tools! I bought a press, I bought a yoke wrench, I bought a dial indicator for measuring back lash and I bought an inch pound gauge, Most items on amazon and really not that expensive, but without them this job wouldn't be for amateurs.

I don't want to get to far ahead of myself without further break in but for now, it works great!

Thanks All!