With a piston produced to sit deeper in the bore, you do not want to 0 deck block or mill heads excessively. Defeats intended purpose of the piston. I believe there is another piston out there that is right around 9.2 to 1 with a 72 cc head.
Do not need a picture of the piston top, the part number was fine. If you just had a deck mill to true, I believe your CR is right around 10.2
Si Vis Pacem Parabellum
1967 Starlight black PMD Engineering 400 Auto 1968 Alpine Blue 400 4 speed 1968 Verdoro Green 400 HO 4 speed 2013 1LE 2SS/RS Inferno Orange Camaro.
