The parking brake assembly was next. This should have been an easy install but it was far from it. The upper mounting bolt was broke off in the dash so it had to be drilled out. I tried to drill out and tap the original size but that did not work so I had to go one size larger. Which meant that I had to drill the bracket out a little larger also. Once installed the swith that activates the parking brake light would hit the AAW fuse box. I grabbed my dremel and sanded down a section of the fuse box that stuck out for no reason.
Before sandblasting and paint.

blasted and painted.

I know it's hard to tell but I did the two tone paint on the pedal. The factory had raw metal and a satin black. I went with flat black on top and satin on the bottom.

Finally installed. New pedal pad,handle, and installed the front parking brake line. If you look real close you can see where the switch is close to the fuse box.