We cut the vinyl off the drip rail edge and were able to put the trim on. I had a NOS set which does include all six pieces. Still tight, but doable.

Also got the master cylinder installed, lines modified, and brakes bled. We flushed out the old fluid and put synthetic in. No need to bench bleed the new master cylinder. We filled it on the car and bled the old school way with no trouble.

Installed the door windows last week along with window sweeps. Yes, as some have commented, the sweeps don't fit without mods. We had to re-drill the holes in the ends for the screws. The very sharp, rough-cut ends aren't so nice, either.