What's up buddy? How's it going? You get your boat ready? Well good news here, got it running and starting on first crank. Trying to decide if I'm ready to put the ac back in yet or if I should leave it out a bit longer. Got an exhaust leak on the driver's side at the manifold connection. The seal didn't seal worth a crap. So here is a laugh for you at my expense. I've spent the better part of the last 2 weeks trying to figure out why the f'ing taillights wouldn't come on when it was getting 12v the the f'ing sockets. Then just by chance, checking grounds I figured out that the f'ing taillights ground through the f'ing housing that bolts to the f'ing frame. *sigh* that's my life, doesn't have to be yours, lol. Got a couple questions on the power steering section for you also if you don't mind since you just redid yours. First, is thus knuckle supposed to have a cover or is it supposed to be open? And it seems like whenever I jack the front end up I have a small puddle of power steering fluid under the knuckle area. Mine doesn't have tilt steering or anything. And lastly, my steering wheel neck is cracked in like 3 places around the neck. Did you get a new wheel or just the center piece?? Seems like it should be a pretty straightforward swap, but then I thought the taillights would be pretty straight forward also. Thanks again