Look on the bright side. You wanted to see what was in the pan, check the oil pump, inspect the rods, crank, and everything else. Does that engine have the windage tray? TIP: the full length windage tray, combined with a 301 baffled oil pan, makes for a great oil control system. When I have an engine on a stand I hate oily messes. I grab a big black plastic cement mixing tub from Home Dupa and place it on the stand legs, to catch any oil or other drippings. As for the priming tool, a big flat bladed screwdriver with the handle busted off will do. Just chuck the shaft in a drill but be careful because there is nothing to bold the blade in place. Go slow!