So I rigged up a grounding station. Buss bar and alligator clips. Grounded each one to the buss and ground the buss to rebar in the ground. It works for houses right? First try basically nothing. Couldnt turn it by hand to get it close. Timing light may have flashed twice. So I switched it 180 figuring it was operator error. Still nothing. So I had the brilliant idea to put a meter on one of the wires(brilliant right)? But no spark from the distributor. Checked the wire feeding the distributor and it gad power. So know what? Bad distributor? It's brand new. Ignition module? I was using a remote start with key in the run position. Any suggestions or tips on troubleshooting? Thanks